Run Program Again From Command Window Matlab Keyboard Shortcut

Using Commands

Commands may be used interactively or executed in batch mode.

Interactive Use

The command window is located (by default) merely below the main menu bar at the tiptop of the EViews window. A blinking insertion cursor in the control window indicates that keyboard focus is in the command window and that keystrokes will be entered in the window at the insertion point. If no insertion cursor is present, only click in the command window to change the focus.

To work interactively, you will type a command into the command window, then press ENTER to execute the control. If you enter an incomplete command, EViews will open a dialog box prompting you lot for additional data.

A control that you enter in the window will exist executed as soon every bit you press ENTER. The insertion point need not be at the cease of the command line when you lot press ENTER. EViews volition execute the entire line that contains the insertion bespeak.

The contents of the control area may also be saved directly into a text file for later utilise. Kickoff brand sure that the control window is agile past clicking anywhere in the window, and then select from the main card. EViews volition prompt yous to save an ASCII file in the default working directory (default name "commandlog.txt") containing the unabridged contents of the command window.

Command Window Editing

When you enter a command, EViews will add together information technology to the list of previously executed commands independent in the window. You can scroll up to an earlier command, edit it, and hit ENTER. The modified control will be executed. You may besides use standard Windows re-create-and-paste between the command window and any other window.

EViews offers a couple of specialized tools for displaying previous commands. First, to bring upwardly previous commands in the order they were entered, press the Control central and the UP arrow (CTRL+Upward). The last control will be entered into the command window. Property down the CTRL primal and pressing Upwardly repeatedly will display the next prior commands. Repeat until the desired command is displayed.

To expect at a history of commands, press the Command Key and the J key (CTRL+J). This primal combination displays a history window containing the last xxx commands executed. Use the UP and DOWN arrows until the desired command is selected and then printing the ENTER key to add together it to the command window, or but double click on the desired command. To close the history window without selecting a control, click elsewhere in the command window or press the Escape (ESC) primal.

To execute the retrieved command, simply press ENTER again. You may first edit the command if y'all wish to do then.

Yous may resize the command window so that a larger number of previously executed commands are visible. Utilise the mouse to motion the cursor to the lesser of the window, hold downward the mouse button, and elevate the bottom of the window downward.

Control Explorer

The Command Explorer provides a quick way to brandish context specific documentation while working in EViews. In particular, yous may use the explorer to list all of the applicable commands and data members for a specific object type, and to display documentation for those commands.

By default, EViews ships with the explorer window in a docked window on the right-paw side of your EViews window. To actuate the explorer, simply click on the tab labeled .

EViews will open a window showing a list of the EViews object types.

• Clicking on the proper noun of an object blazon will open up a documentation page for that object in a browser window.

• Clicking on the arrow to the left of the object name will toggle the display of alphabetical tree-listing of all of the commands, procs, and data members for that object. To open a browser window to the documentation of a given chemical element, click on the proper name.

Alternately, from the open up explorer window, you lot may apply the search box to locate a specific command or proc.

if yous already know the command proper name or a portion of the command proper noun, you may search for the command by simply typing portion of that control followed by a wildcard ("*") into the search window and pressing return. A list of matching commands volition exist displayed. Clicking on i of the results volition display the respective aid page.

Utilize the left and right arrows to the left of the search window to switch between the search results and the total list of commands.

By default, the Command Explorer window will automatically close when it loses focus. Y'all may click on the push-pin in the upper right portion of the window to dock the open up window. Click on the push-pin over again to restore the docked window to motorcar-close.

Auto-Complete Names and Commands

You may instruct EViews to machine-complete the proper noun of the object or object command y'all are in the middle of typing. This feature is particularly useful in workfiles with long series names or when issuing a series of commands. (Note that machine-complete is just enabled when there is a workfile open).

Object Proper name Motorcar-Complete

Assuming you take an open workfile, simply begin typing the first characters of the proper noun of an object or control. Printing CONTROL+SPACE to display a listing of the objects in the electric current workfile.

Ne

If there are no ambiguities, the proper name of the object volition be added to the command window. If there are ambiguities, a list of all the objects in the workfile will appear with the first match selected:

From here you can either press ENTER and the name of the object will be completed, or you may employ the upwardly and downward arrows to select a name and press ENTER to consummate your option:

Alternately, yous may press Control+SPACE at whatever time when nothing has been typed, to see the full list of objects.

Object Command Car-Complete

Similarly, you may utilise auto-completion for commands. If yous accept typed an object name along with a trailing period, printing Control+SPACE again to display the listing of commands for that object. Assuming that object exists in your current workfile, EViews volition list all the commands and procs for that object,

As with object proper noun auto-complete, typing a portion of a command volition add the full string if there are no ambiguities, or will brandish a list of applicable commands with the nearest match partially selected:

Using the pointer keys, select the desired command:

and press ENTER to add the control to the window:

Command and Capture Window Docking

The EViews xi command and capture windows are dockable, hideable, and floatable.

Dockable and hideable windows allow you to move oftentimes used windows out of the fashion while keeping them close at mitt. They offering space saving convenience which is peculiarly valued when working with smaller screen devices like laptops.

Floatable windows permit you to movement them out of the way of your work. You lot may even go so far equally to float a window outside of the EViews frame.

To re-arrange the layout of the Control or Capture window, first make sure the window pane is not in sliding mode (the Pin icon should exist and then that it is vertical).

And then drag the window to the desired location or dock.

Annotation that information technology is possible to drag a window into an unwanted position where it covers a portion of a window with which y'all wish to work. In most cases, you may simply move the window out of the mode. If it is difficult to drag the window considering you cannot see the titlebar, you should be able use the whorl bars to gain easier access to the titlebar of the window.

Floating

You can elevate the window to a new location just like whatsoever other window in EViews. Still, unlike other EViews windows, You can elevate the command window outside of the EViews frame:

Docking

Both the command and capture window panes can now be docked on whatever side inside the main EViews window. Brainstorm dragging the pane past left-clicking title bar and holding information technology downwards as you drag it off the edge. At that point, you will see minor docking guides appear inside the main EViews window:

To dock the window, you volition drag it to one of the docking guides. The docking beliefs will depend on which guide you select.

The docking guides allow yous to dock the window pane to one of viii pre-divers areas. The four guides on the outer border of the master window allow you lot to dock the window as the primary pane while the inner guides allow you to dock the window as a secondary pane. Primary panes accept over the entire length of the selected edge and force other docked panes that could intersect to get smaller to compensate. Secondary panes merely have over the portion of the selected edge that is not already occupied.

For case, if the capture pane is dragged to the correct-most docking guide like this:

and and so released, the last layout looks like this

Because it is primary, it pushes the docked Control window pane at the elevation of the window to become smaller.

Alternatively, if the inner right guide was selected instead like this:

the last layout would look like this

Docking 2 panes onto the same primary border can effect in stacking, with the recently moved pane being adjacent to the edge (as the main), and any secondary panes being stacked adjacent to the master pane (in the order they were docked).

You can as well dock a pane inside another pane in order to use the share the aforementioned infinite. If you drag a pane over some other pane, y'all are presented with additional docking guides within the other pane:

For example, selecting the inner-right guide expanse allows the Capture pane to appear to the right of the Command pane with an adjustable split up bar to let you resize the split:

The docking guide as well offers an additional guide area directly in the center that allows you to convert both panes into a tabbed view:

Pinning

If your window is docked, y'all tin "pivot" it by clicking on the pin icon (so that it is horizontal). When pinned, the window will be minimized and a small tab will be displayed in the docked location.

To expand the pinned window, only click on the tab. The window volition automatically contracts when it loses focus. Clicking on the Pin icon again will "united nations-pivot" and expand the window permanently.

Keyboard Focus

We notation that equally you open and close object windows in EViews, the keyboard focus may modify from the command window to the active window. If you and then wish to enter a command, you volition kickoff demand to click in the control window to set the focus. You can influence EViews' method of choosing keyboard focus by changing the global defaults—simply select in the main carte, and alter the setting equally desired.

Batch Programme Employ

Y'all may assemble a number of commands into a plan, and then execute the commands in batch way. Each command in the program will exist executed in the order that it appears in the programme. Using batch programs allows yous to make utilise of avant-garde capabilities such every bit looping and status branching, and subroutine and macro processing. Programs also are an splendid fashion to certificate a enquiry project since yous volition have a record of each step of the project. Batch program use of EViews is discussed in greater detail in "EViews Programming".

1 style to create a program file in EViews is to select . EViews will open up an untitled program window into which you may enter your commands. You lot can salve the plan by clicking on the or button, navigating to the desired directory, and entering a file name. EViews volition append the extension ".PRG" to the name you provide.

Alternatively, you can utilise your favorite text (ASCII) editor to create a program file containing your commands. Information technology will prove convenient to name your file using the extension ".PRG". The commands in this program may so be executed from within EViews.

Yous may also enter commands in the command window and and then use to save the log for editing.

hauserdideenable.blogspot.com

Source: http://www.eviews.com/help/content/cbasics-Using_Commands.html

Share this post